Phoenix Gold ZDT-BMW2

To install the amplifier, in addition to this T-wire set, you will need:

• ISO wiring harness (available in two different lengths):
  • 2.2 meters
  • 5.2 meters

• ---

  Phoenix Gold DSP amplifier (available in three different models):
  • ZDA4.8
  • ZDA6.8
  • ZDA8.8

Installation instructions:

Installation made easy:

1. Disconnect the car's original (OEM) wiring harness from the player.

2. Connect the ZDT wiring harness to the OEM wiring harness and plug the other end into the player.

3. Connect the T-harness to the ISO-harness. (Available in 2.2m and 5.2m )

4. Disconnect the connectors for the under-seat speakers – these can be found under each front seat.

5. Pull the 4-pin connectors to the appropriate front seat and connect them to the under-seat speakers.

6. Connect the black 4-pin loop connector to the OEM wiring harness that was disconnected from the under-seat speakers.

7. Connect the whole thing to the ZDA4.8 / ZDA6.8 / ZDA8.8 amplifier – and the installation is complete!

Why choose ZDT wiring harness?

• Maximum power and ground capacity: Manufactured with the largest possible power and ground cables to ensure your amplifier receives a consistent and reliable power supply.

• Improved signal transmission and interference rejection: Twisted high-level signal cables and larger speaker outputs ensure excellent signal transmission and minimize interference – resulting in clear and precise sound reproduction.

• Easy installation: Long high-level cables prevent cable clutter behind the OEM player, making installation simpler.

• Protected and finished construction: All wires are taped for protection and neater handling – no loose or unnecessary wires or connectors to complicate installation.