We will notify you by email when the product is available again!
Questions?
DLS ACW10i
A new version of the popular ACW10 active subwoofer.
The DLS ACW10i is an updated ultra-compact active subwoofer, designed to address the biggest shortcoming of many car audio systems: missing punch and mid-bass power.
The ACW10i brings much-needed physicality to music, without taking up the entire trunk space.
-
Bass Optimize
- Factory-installed car stereos often have built-in bass boosts, and Bass Optimize offers a -12dB to +12dB adjustment range at 45Hz, allowing you to counteract the stereo's own bass boosts and fine-tune the frequency response to be natural.
-
Kick Bass
- With the ACW10i, you can achieve a punchy and dynamic mid-bass reproduction if desired. When the ACW10i is installed, for example, under the seat, in the footwell, or below the glove compartment, the Kick Bass function provides a significant improvement in the 60-100Hz range.
The Kick Bass function is not recommended for use when the ACW10i is the only subwoofer in the system, as this function cuts off the lowest frequencies and only reproduces mid-bass frequencies.
- With the ACW10i, you can achieve a punchy and dynamic mid-bass reproduction if desired. When the ACW10i is installed, for example, under the seat, in the footwell, or below the glove compartment, the Kick Bass function provides a significant improvement in the 60-100Hz range.
-
Phase shift / Low-pass filter / Input sensitivity adjustment
- Allows you to adjust the sound reproduction exactly to your liking.
-
Smart Load Circuitry
- Ensures compatibility even with cars where the stereos use speaker line monitoring and protection circuits.
-
Quick Power Connector
- Detachable power connector makes installation easier
-
Automatic start-up
- With a speaker-level signal, the subwoofer starts automatically and does not require a separate remote wire.
-
Wired level control
- Allows for bass level adjustment from the driver's seat.
Technical specifications
| Model | ACW10i |
|---|---|
| Amplifier | Class AB |
| Power | 200W RMS / 450W MAX |
| Distortion (THD) | < 0.4 % |
| Signal-to-noise ratio (SNR) | > 95 dB |
| Frequency response | 30 Hz – 150 Hz |
| Input sensitivity (HLI) | 0.9 V – 35 V |
| Input sensitivity (RCA) | 300 mV – 6 V |
| Smart Load Circuitry (SLA) | Yes |
| Automatic start-up (ATO) | Yes |
| Bass Optimize circuit | Yes, -12 dB ... +12 dB @ 45 Hz |
| Low-pass filter (LPF) | Yes, 50 Hz – 150 Hz |
| Kick Bass / Subsonic filter | Yes, selectable OFF / ON @ 40 Hz (12 dB) |
| Remote control (EBC) | Yes |
| Power connector | Quick Power Connector |
| Fuse | 25 A |
| Subwoofer element | 10 inches, 2 Ohms |
| Dimensions (L x W x H) | 345 x 245 x 79 mm |