We will notify you by email when the product is available again!
Questions?
Connects2 CAM-RT2.2 Reversing Camera
This car-specific reversing camera is installed in place of the car's original auxiliary brake light. The camera has IP68 protection – completely dustproof and resistant to high-pressure water jets. Infrared LEDs enable imaging even in complete darkness (0 lux), and Night Vision extends up to 10 meters.
The camera has a fixed cable with a multi-pin connector. A 10 m extension cable is included, which connects the camera to, for example, an Alpine head unit or a separate display.
Compatibility
- Renault Trafic 2014–2021
Technical Specifications
- Type: reversing camera with auxiliary brake light
- Viewing angle: 170°
- Sensor: 1/3″ CCD
- IP rating: IP68
- Infrared LEDs: yes
- Minimum lux: 0 lux
- Night Vision range: 10 m
- Resolution: 510 × 492 (NTSC) / 500 × 582 (PAL)
- Operating voltage: 12 V
- Included: 10 m extension cable
- Audio: no
Installation
- Remove the car's original auxiliary brake light and disconnect its wiring.
- Remove the bulb from the original brake light and install it into the CAM-RT2.2 brake light.
- Connect the wire to the CAM-RT2.2 camera and test the brake light's functionality.
- Connect the included extension cable to the camera's fixed cable and install the camera in the original brake light's location. Ensure that no wires are bent or pinched.
- Black wire = ground
- Red wire = power from the reverse light
- Yellow RCA cable = to the head unit/display's reversing camera input. If an Alpine head unit with Direct camera connection is used, an Alpine AH-CAMA-ALP1 adapter is required.