We will notify you by email when the product is available again!
Questions?
ACV 42xbm012-0 Steering Wheel Control Adapter for BMW 1er/3er/5er/X5/X6 Quadlock Multilead MOST Amp lose
• Original steering wheel remote control to work with your new car radio
• Vehicles with Business Professional OEM HU
• Vehicles with OEM MOST amplifier system
• Vehicles without iDrive
• BMW E81/82/87/88
• BMW E90/91/92/93
• BMW E60/61 / X5 / X6
This adapter allows you to use your car's original steering wheel remote control with your new car radio.
A universal MULTILEAD cable is included, which, with the included instructions, can be made to work with the following different head unit brands that have remote control capability.
Compatibility:
BMW 1 series (E81/82/87/88) 03/2004 - 10/2013
BMW 3 series (E90/91/92/93) 03/2005 - 10/2013
BMW 5 series (E60/61) 07/2003 - 07/2010
BMW X5 (E70) 03/2007 - 09/2013
BMW X6 (E71/E72) 05/2008 - 06/2014
Vehicles with Business Professional OEM HU
Vehicles with OEM MOST amplifier system
Vehicles without iDrive
PDC not supported*
Warning chimes not supported*
Specifications:
Note:
CAN Bus
connector: 40 Pin Quadlock BMW
connector: +12V continuous current yellow clamp 30 battery fused
connector: OEM amplified system MOST RCA(m) red/white
connector: OEM SWC 3,5mm Jack / loose wire
vehicles with Business Professional OEM HU
vehicles with OEM MOST amplified system
vehicles without iDrive
PDC not supported*
warning chimes not supported*
dip switch settings for the retrofit device manufacturer (look into the manual)
RCA(m) front preamp output retrofit HU
fader function not supported
Vehicle application:
BMW 1 series (E81/82/87/88) 03/2004 - 10/2013
BMW 3 series (E90/91/92/93) 03/2005 - 10/2013
BMW 5 series (E60/61) 07/2003 - 07/2010
BMW X5 (E70) 03/2007 - 09/2013
BMW X6 (E71/E72) 05/2008 - 06/2014
Following signals are provided:
Reimported vehicles or vehicles with different software may be incompatible in functions.
red: +12V ignition clamp 15
orange: +12V illumination clamp 58
purple/white: +12V reverse gear signal
pink: speed pulse signal
green: GND park brake signal
load capacity outputs: 250 mA max.
current requirement more than 250 mA:
1 relay coil resistance 75 Ohm min.
2 relays coil resistance 150 Ohm min.
SWC
OEM amplified system fader function not supported
*vehicles with PDC / warning chimes item: can-pdc