We will notify you by email when the product is available again!
Questions?
ACV 2-DIN Installation Kit and Radio Connection Set for Audi TT (8J) 09/2006-04/2014
• 2-DIN installation kit + radio connection set
• Compatibility: Audi TT
2-DIN installation kit radio connection set with steering wheel controls for Audi
Many cars have a vehicle-specific factory radio that is integrated into the center console.
The installation kits include all components needed to replace the OEM unit.
Depending on the vehicle equipment, all adapters and connections required for operating the aftermarket device and restoring vehicle functions are included in the scope of delivery.
Please note the installation recommendations for individual components.
In some cases, not all vehicle functions may be supported.
For example, Trailer Assist, E Call or other driving assistance systems.
Before installation, check the OEM device and the vehicle menu for various settings.
Not all functions may be available, support depends on the car's equipment and the aftermarket radio.
Compare the adapter connectors with the car's original connectors and ensure their compatibility before installation.
Also check the model of the car's original factory radio.
Test the car's functions, settings and steering wheel controls before final installation.
Compatibility:
Audi TT (8J) 09/2006 - 04/2010
Audi TT (8J) 08/2010 - 04/2014
Technical data:
CAN-Bus
Connector: 40-pin Quadlock VAG connector
Connection: OEM steering wheel control 3.5 mm connector / loose cable
Connection: 2-channel / 4-channel OEM sound system RCA(m) for front and rear doors
Connection: OEM antenna Fakra(m)(double) DIN(m)
blue: +12V antenna remote
Blue: +12V amplifier remote
Radio bezel with 2-ISO installation kit
Vehicles with Blaupunkt / Matsushita / Grundig Concert II / Symphony II / Chorus II 2-DIN OEM unit
Vehicles with RNS-E 16:9 OEM navigation
Vehicles without Bosch BNS 5.0 Monochrome OEM navigation*
Aftermarket devices with pre-amplifier output power greater than 3V
Aftermarket installations with pre-amplifier output power less than/greater than 3V:
LFB Audi A3/A4/A6/R8/TT 40-pin Quadlock amplifier 2/4 channel Product: 42xad006
Vehicles 08/2010 - 04/2014, if the OEM sound system is not working:
Sound system coding from CAN-Bus activation to remote activation is required if possible
Address J525 Activation 1 Remote (0xxx?xx)
Vehicles with amplifier shutdown sound in test additionally:
Interference suppression filter NF Ground decoupling RCA Article number: 30.5000-01
Aftermarket radio manufacturer-specific DIP switch settings (see BDA)
Functions and signals:
Imported cars and different software versions may have compatibility deviations.
red: +12V ignition terminal 15
orange: +12V illumination terminal 58
violet/white: +12V reverse signal
pink: speed signal
green: ground GND handbrake signal
Maximum output load: 250 mA.
Power requirement over 250 mA:
1 Relay coil resistance 75 ohms min.
2 Relay coil impedance 150 ohms min.
steering wheel control
OEM sound system 2-channel/4-channel
*Vehicles with BNS 5.0 OEM navigation LFB Audi/Seat/Skoda/VW Various vehicles 40-pin Quadlock Product: 42A-1324-001
Scope of delivery:
2-DIN Installation frame Audi TT(8J) 04/2006-03/2014 black Article number: 381320-19
LFB Audi A3/A4/A6/R8/TT Quadlock Multilead Amplifier RCA loose Article: 42xad002-0
Antenna adapter Fakra(m)(double)DIN(m) 12V Phantom loose Article number: 1524-77-0
Mounting bracket VW / Audi / Seat / Skoda Article number: 181320-01-0
Specifications:
Scope of delivery:
2-DIN radio cover Audi TT(8J) 04/2006-03/2014 black Article: 381320-19
LFB Audi A3/A4/A6/R8/TT Quadlock Multilead Amp RCA loose Item: 42xad002-0
Antenna adapter Fakra(m)(double)DIN(m) 12V Phantom loose Article: 1524-77-0
Release Bracket VW / Audi / Seat / Skoda loose Article: 181320-01-0