Vi meddelar dig via e-post när produkten finns åter i lager!
Frågor?
Match PP 86DSP MK2
Match PP 86DSP är en kraftfull DSP-förstärkare.
Förstärkaren har 8 kanaler, en RCA-utgång samt en 9-kanals DSP-processor.
RCA-utgången är avsedd för exempelvis en separat subwoofer-förstärkare. Alla dessa kanaler kan justeras efter önskemål. Förstärkaren är mångsidig och kan användas med både originalhögtalare och eftermarknadshögtalare.
Audiotec Fischers Class HD-teknik, den fantastiska beräkningskraften hos 64-bitars DSP:n samt nya innovativa DSP-funktioner garanterar en ljudupplevelse i toppklass.
ACO
Match PP 86DSP är byggd på Audiotec Fischers nya ACO-plattform (ACO = Advanced 32 Bit CoProcessor), vilket gör enheten otroligt snabb och effektiv.
Förstärkaren har naturligtvis även en MEC-plats för extra moduler där man kan ansluta exempelvis en Bluetooth-ljudströmningsmodul eller en HD USB-ljudingång.
6-kanals ADEP .3 högnivåingång ( 5-11V )
ISA (Input Signal Analyzer) och InputEQ, det vill säga mätning av insignal och equalizer.
Inställningarna görs via den tydliga DSP PC-Tool-mjukvaran på en PC.
Tekniska specifikationer:
Technical data:
Output power RMS
- @ 4 Ohms 8 x 55 Watts
- @ 2 Ohms 8 x 70 Watts
- @ 1 Ohm -
- bridged @ 4 Ohms -
- bridged @ 2 Ohms -
- Subwoofer output @ 4 Ohms -
- Subwoofer output @ 2 Ohms -
Amplifier technology Class HD
Inputs 6 x Highlevel speaker input
1 x Optical SPDIF (12 - 96 kHz)
1 x MEC
1 x Remote In
Input sensitivity Highlevel 5 - 11 Volts
Input impedance RCA / Cinch -
Input impedance highlevel 9 - 33 Ohms with ADEP.3
Outputs 8 x Speaker output
2 x RCA / Cinch (mono)
2 x Remote Out
Output voltage RCA / Cinch 3 Volts RMS
Frequency response 20 Hz - 22,000 Hz
DSP resolution 64 Bit
DSP power 295 MHz (1.2 billion MAC operations/second)
Sampling rate 48 kHz
DSP type Audio signal processor
Signal converters A/D: BurrBrown
D/A: BurrBrown
Signal-to-noise ratio digital input 105 dB (A-weighted)
Signal-to-noise ratio analog input 103 dB (A-weighted)
Distortion (THD) 0.015 %
Damping factor 100
Operating voltage 10.5 - 18 Volts (max. 5 sec.down to 6 Volts)
Power rating DC 12 V ⎓ 40 A max.
Idle current 685 mA
Max. remote output current 500 mA
Operating temperature range -40° C to +70° C
Fuse 2 x 25 A LP-Mini-fuse (APS)
Additional features Class HD technology with dynamically controlled
power supply, 32 Bit CoProcessor, ADEP.3 circuit, Smart Control Port, Start-Stop capability, USB, MEC slot, Auto Remote switch, galvanically isolated Line Outs
Dimensions (H x W x D) 44 x 185 x 164 mm /
1.73 x 7.28 x 6.46“
Scope of delivery
1 x Amplifier MATCH PP 86DSP MK2
3 x Connection cable
1 x USB cable
1 x Mounting material
1 x Instruction manual
Technical data:
Output power RMS
- @ 4 Ohms 8 x 55 Watts
- @ 2 Ohms 8 x 70 Watts
- @ 1 Ohm -
- bridged @ 4 Ohms -
- bridged @ 2 Ohms -
- Subwoofer output @ 4 Ohms -
- Subwoofer output @ 2 Ohms -
Amplifier technology Class HD
Inputs 6 x Highlevel speaker input
1 x Optical SPDIF (12 - 96 kHz)
1 x MEC
1 x Remote In
Input sensitivity Highlevel 5 - 11 Volts
Input impedance RCA / Cinch -
Input impedance highlevel 9 - 33 Ohms with ADEP.3
Outputs 8 x Speaker output
2 x RCA / Cinch (mono)
2 x Remote Out
Output voltage RCA / Cinch 3 Volts RMS
Frequency response 20 Hz - 22,000 Hz
DSP resolution 64 Bit
DSP power 295 MHz (1.2 billion MAC operations/second)
Sampling rate 48 kHz
DSP type Audio signal processor
Signal converters A/D: BurrBrown
D/A: BurrBrown
Signal-to-noise ratio digital input 105 dB (A-weighted)
Signal-to-noise ratio analog input 103 dB (A-weighted)
Distortion (THD) 0.015 %
Damping factor 100
Operating voltage 10.5 - 18 Volts (max. 5 sec.down to 6 Volts)
Power rating DC 12 V ⎓ 40 A max.
Idle current 685 mA
Max. remote output current 500 mA
Operating temperature range -40° C to +70° C
Fuse 2 x 25 A LP-Mini-fuse (APS)
Additional features Class HD technology with dynamically controlled
power supply, 32 Bit CoProcessor, ADEP.3 circuit, Smart Control Port, Start-Stop capability, USB, MEC slot, Auto Remote switch, galvanically isolated Line Outs
Dimensions (H x W x D) 44 x 185 x 164 mm /
1.73 x 7.28 x 6.46“
Scope of delivery
1 x Amplifier MATCH PP 86DSP MK2
3 x Connection cable
1 x USB cable
1 x Mounting material
1 x Instruction manual