Shopping cart (0)
Shopping cart is empty.
We will notify you by email when the product is available again!
Questions?
Pioneer DEQ-S1000A2
The DEQ-S1000A2 is a 4-channel ″plug-and-play″ DSP amplifier. The Pioneer DEQ-S1000A2 is installed between the car's original player and speakers.
-2/3- way crossovers
- Equalizer
- Time delay adjustments
- The amplifier can also be used as a line converter for a subwoofer amplifier.
1 x USB port
3 x line output (4V)
Standard Mode = Subwoofer + Front + Rear outputs
Network Mode = Subwoofer + Midrange + Treble outputs
1 x USB port
Standard Mode:
Front and rear output high-pass filter (HPF) for main speakers
50 / 63 / 80 / 100 / 125 / 160 / 200 Hz
High-pass crossover 0 / 6 / 12 / 18 / 24 dB/oct
Low-pass filter (LPF) on subwoofer output for subwoofer
50 / 63 / 80 / 100 / 125 / 160 / 200 Hz
Low-pass crossover 0 / 6 / 12 / 18 / 24 dB/oct
Subwoofer level control -24dB – +10dB (1dB steps)
Subwoofer Phase: Normal / Inverted
Network Mode:
Low-pass filter for subwoofer, band-pass filters for midrange and high-pass filter for tweeters
Front outputs = Treble outputs
Rear outputs = Center outputs
Subwoofer
Low LPF: 25 / 31.5 / 40 / 50 / 63 / 80 / 100 / 125 / 160 / 200 / 250 Hz
Low LPF Slope: 12 / 18 / 24 / 30 / 36 dB/oct
Low Level: -24db – +10dB
Subwoofer Phase: Normal / Inverted
Midrange
Mid HPF: 25 / 31.5 / 40 / 50 / 63 / 80 / 100 / 125 / 160 / 200 / 250 Hz
Mid HPF Slope: 0 / 6 / 12 / 18 / 24 dB/oct
Mid LPF: 1.25 / 1.6 / 2 / 2.5 / 3.15 / 4 / 5 / 6.3 / 8 / 10 / 12.5 kHz
Mid LPF Slope: 0 / 6 / 12 / 18 / 24 dB/oct
Mid Level: -24db – 0dB
Trebles
High HPF: 1.25 / 1.6 / 2 / 2.5 / 3.15 / 4 / 5 / 6.3 / 8 / 10 / 12.5 kHz
High HPF Slope: 6 / 12 / 18 / 24 dB/oct
High Level: -24db – 0dB
NOTE!!!
The high-pass of the treble cannot be bypassed, but the minimum crossover frequency is 1.25kHz and the minimum crossover slope is 6dB/oct. In NW mode, there are no outputs for rear speakers, only for active 2-way front + subwoofer.
Channel-specific time delay
0 – 350cm (2.5cm increments)
13-band graphic EQ
50Hz / 80Hz / 125Hz / 200Hz / 315Hz / 500Hz / 800Hz / 1.25kHz / 2kHz / 3.15kHz / 5kHz / 8kHz / 12.5kHz
Correction range: ±12dB
The device is adjusted using the Pioneer Sound Tune app, which is available for download from the app stores for Android and Apple devices. The phone must be connected to the device via a USB cable while making adjustments.
The iPhone is connected to the USB port using the USB cable that came with the Apple device.
Connect your Android device to the USB port using the USB cable that came with your Android device.
Includes infrared eye and infrared remote control
Dimensions (mm) 170 x 40 x 95
Specifications:
Pioneer Sound Tune App
USB Input1
Accessories1 Remote Control
Maximum power4 x 50 W
2 x 50 W (4Ω) for subwoofer
1 x 70 W (2Ω) for subwoofer
Frequency response 10Hz to 20kHz
S/N ratio105 dB
Max. current consumption10 A
Chassis size (W x H x D) 170 x 40 x 95
Unit weight0.59
Compact size
RCA terminalsYes
Speaker line input sensorYes
Apple Compatibility
Made for iPhone
Compatible Generations• iPhone X / iPhone 8 / iPhone 8 Plus
• iPhone 7 / iPhone 7 Plus / iPhone SE
• iPhone 6s / iPhone 6s Plus / iPhone 6 / iPhone 6 Plus
• iPhone 5s / iPhone 5c / iPhone 5
Supported Functions • Battery Charging
• Music playback
Android Compatibility
Compatible with Android
Quick Charge for Android
Audio
13-band Graphic EQ
MOSFET 50W x 4 Amplifier
Network Mode3-Way Network Mode
Listening Position Selector
Manual TA (Time Alignment)
High Pass Filter
Low Pass Filter
Subwoofer Control
RCA Pre-Outs3. (Front, rear and subwoofer)
High Voltage Output (4Volt)
Advanced Audio Features Exclusively Designed Audio Parts.
Source Calibration, (Factory Time Alignment and EQ Cancel).
31-Band Graphic EQ When Used With Pioneer Sound Tune App.
Live Simulation When Used With Pioneer Sound Tune App.
FLAC
Connections
Hand Held Remote Control Included
POWER SOURCE 14.4V DC
(10.8-15.1V allowable)
GROUNDING SYSTEM Negative type
MAX. CURRENT CONSUMPTION 9.2A
DIMENSIONS 170(W) x 40(H) x 95(D)mm
FUSE 10A
WEIGHT 0.59kg
MAX POWER 50W x 4
50Wx2ch/4Ω + 70Wx1ch/2Ω (for SUB-WOOFER)
CONTINUOUS POWER 22W x 4
(50Hz to 15kHz, 5%THD, 4Ω LOAD, Both Channels Driven)
LOAD IMPEDANCE 4Ω
(4 - 8Ω(2Ω for 1ch) allowable)
PREOUT OUTPUT LEVEL (MAX) 4.0V
IMPEDANCE 250Ω
FREQUENCY RESPONSE 10Hz to 20kHz (+0dB , -1dB)
S/N RATIO 105dB
THD 0.01%
EQUALIZER (13BAND GRAPHIC EQUALIZER)
FREQUENCY 50Hz, 80Hz, 125Hz, 200Hz, 315Hz, 500Hz
800Hz, 1.25kHz, 2kHz, 3.15kHz, 5kHz, 8kHz, 12.5kHz
GAIN ±12dB(0.1dB step)
SPEAKER SETTINGS
STANDARD MODE
FRONT/REAR (HPF)
FREQUENCY
50Hz, 63Hz, 80Hz, 100Hz, 125Hz, 160Hz, 200Hz
SLOPE
0dB(Pass), -6dB/oct, -12dB/oct, -18dB/oct, -24dB/oct
SUBWOOFER (LPF)
FREQUENCY
50Hz, 63Hz, 80Hz, 100Hz, 125Hz, 160Hz, 200Hz
SLOPE
0dB(Pass), -6dB/oct, -12dB/oct, -18dB/oct, -24dB/oct
GAIN -24 - +10dB (1dB/Step)
PHASE NORMAL/REVERSE
SPEAKER LEVEL -24 - +10dB (1dB/Step)
TIME ALIGNMENT 0cm - 350cm (2.5cm/step)
NETWORK MODE
HIGH (HPF) FREQUENCY 1.25kHz, 1.6kHz, 2kHz, 2.5kHz, 3.15kHz
4kHz, 5kHz, 6.3kHz, 8kHz, 10kHz, 12.5kHz
SLOPE -6dB/oct, -12dB/oct, -18dB/oct, -24dB/oct
MID (LPF) FREQUENCY 1.25kHz, 1.6kHz, 2kHz, 2.5kHz, 3.15kHz
4kHz, 5kHz, 6.3kHz, 8kHz, 10kHz, 12.5kHz
SLOPE
0dB(Pass), -6dB/oct, -12dB/oct, -18dB/oct, -24dB/oct
MID (HPF) FREQUENCY 25Hz, 31.5Hz, 40Hz, 50Hz, 63Hz, 80Hz
100Hz, 125Hz, 160Hz, 200Hz, 250Hz
SLOPE
0dB(Pass), -6dB/oct, -12dB/oct, -18dB/oct, -24dB/oct
SUBWOOFER (LPF)
FREQUENCY 25Hz, 31.5Hz, 40Hz, 50Hz, 63Hz, 80Hz
100Hz, 125Hz, 160Hz, 200Hz, 250Hz
SLOPE 0dB(Pass), -12dB/oct, -18dB/oct
-24dB/oct, -30dB/oct, -36dB/oct
GAIN -24 - +10dB (1dB/Step)
PHASE NORMAL/REVERSE
SPEAKER LEVEL -24 - +10dB (1dB/Step)
TIME ALIGNMENT 0cm - 350cm (2.5cm/step).