{"product_id":"gz-hydrogen-power-2x12-inc","title":"GZ Hydrogen Power 2x12 inc","description":"\u003ch3\u003e GZ Hydrogen Power 2x12 inc\u003c\/h3\u003e\n\n \u003cbr\u003eGZ Hydrogen Power 2x12 inc includes 2 GZHW 30XSPL-D1 subwoofers, a 4-AI212SLOT enclosure, and an Ai-Sonic S2-A2200.1 amplifier with a separate level control.\u003cbr\u003e\u003cbr\u003e GZHW 30XSPL-D1 :\u003cbr\u003e\u003cbr\u003e The Hydrogen SPL drivers have been designed using Klippel optimization. In a 10-hour test, the driver's behavior is examined using numerous measurement results, and thus weak points and problems that require improvement are identified early in the design process. The driver is subjected to up to four times the power it can handle. The end result is a driver with a very flat impedance response, meaning it accepts power well at all frequencies, has good sensitivity, and can handle power well.\u003cbr\u003e\u003cbr\u003e 4-AI212SLOT:\u003cbr\u003e\u003cbr\u003e 4-AI212SLOT is an ISO enclosure made of MDF board. Large port with rounded ends for good flow.\u003cbr\u003e The case is upholstered in black felt, and the front panel has carbon fiber-look tape. The case is equipped with a connector terminal with cable.\u003cbr\u003e \u003cbr\u003eEnclosure dimensions: width 930mm x height 380mm x depth 400mm\u003cbr\u003e\u003cbr\u003e S2-A2200.1 With S2-BASS KNOB:\u003cbr\u003e\u003cbr\u003e AI-Sonic S2 amplifiers. Designed in Finland by AI-Group.\u003cbr\u003e\u003cbr\u003e With excellent sound quality, versatile control features, and the ability to connect to any system to drive any speaker, it's hard to beat the Ai-Sonic S2 amplifiers.\u003cbr\u003e\u003cbr\u003e The ambitious goal was to design and implement an amplifier range that offers the best possible sound quality in its price range. The work began by designing a unique cooling profile.\u003cbr\u003e\u003cbr\u003e Maximizing cooling and minimizing the physical size of the devices continued with the PCB design. The locations of the components on the PCB are carefully selected to achieve the smallest possible physical size of the amplifier and efficient component cooling.\u003cbr\u003e\u003cbr\u003e The circuit board uses twice as much copper as a standard car amplifier circuit board.\u003cbr\u003e \u003cbr\u003eThree years have been spent selecting and testing the components for the AI-Sonic S2 amplifiers. By testing and listening to numerous different parts and combinations of parts, we have found the parts that form the best possible whole in their price range.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003e GZHW 30XSPL-D1:\u003cbr\u003e\u003cbr\u003e Model: GZHW 30SPL\u003cbr\u003e Diameter: 300 mm \/ 12″\u003cbr\u003e Mounting diameter: 315 mm \/ 12.4“\u003cbr\u003e Mounting depth: 198 mm \/ 7.8“\u003cbr\u003e Voice coil: 75 mm \/ 3” copper voice coil\u003cbr\u003e Cone: Reinforced paper\u003cbr\u003e Power Handling: 3000 W SPL Power\u003cbr\u003e Impedance: 2 x 1 Ohm\u003cbr\u003e SPL: 85 dB\u003cbr\u003e Xmax: 45 mm \/ 1.77″\u003cbr\u003e Fs: 35.4 Hz\u003cbr\u003e Qts: 0.44\u003cbr\u003e Left: 15.8 L \/ 0.56 cu.ft.\u003cbr\u003e\u003cbr\u003e 4-AI212SLOT:\u003cbr\u003e\u003cbr\u003e Ported enclosure for 2x12″ subwoofer\u003cbr\u003e Net volume: 2x40 liters.\u003cbr\u003e Port area: 350 cm2\u003cbr\u003e Port height: 350mm\u003cbr\u003e Port width: 100mm\u003cbr\u003e Tuning frequency: 38 Hz\u003cbr\u003e Diameter of speaker hole: 285mm\u003cbr\u003e Measurements ( W x H x D ): 930 x 380 x 400.\u003cbr\u003e\u003cbr\u003e S2-A2200.1 With S2-BASS KNOB:\u003cbr\u003e\u003cbr\u003e RMS POWER (1ohm) THD 0.5% 2200W\u003cbr\u003e RMS POWER (2ohm) THD 0.5% 1400W\u003cbr\u003e RMS POWER (4ohm) THD 0.5% 750W\u003cbr\u003e BRIDGED POWER(2ohm) THD 0.5% 4400 W ( Link ) \u003cbr\u003eBRIDGED POWER(4ohm) THD 0.5% 2800W ( Link )\u003cbr\u003e THD: 0.5%\u003cbr\u003e BANDWIDTH: 10-200 Hz\u003cbr\u003e S\/N RATIO(A-WEIGHTED): 90dB\u003cbr\u003e INPUT SENSITIVITY: 0.35- 6V\u003cbr\u003e LOW PASS: 50-200 Hz\u003cbr\u003e SUBSONIC: 10-50Hz\u003cbr\u003e CROSSOVER SLOPE: 12dB \/24dB\/oct\u003cbr\u003e BASS BOOST: 0-12dB(@45Hz)\u003cbr\u003e POWER FUSE: External 250A\u003cbr\u003e\u003cbr\u003e Cable fitting size:\u003cbr\u003e +12V = 50mm2\u003cbr\u003e GND = 50mm2\u003cbr\u003e REM = 6mm2\u003cbr\u003e SPEAKER = 20mm2\u003cbr\u003e\u003cbr\u003e Current Draw (Max): 250A\u003cbr\u003e\u003cbr\u003e DIMENSIONS: W: 183mm \/ (7.2 IN)\u003cbr\u003e H: 60mm \/ (2.4 IN)\u003cbr\u003e W: 524mm \/ (20.6 IN).","brand":"Ground Zero","offers":[{"title":"Default Title","offer_id":56758996599159,"sku":"GZ Hydrogen Power 2x12 inc","price":1299.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/5159\/4359\/files\/GZ-Hydrogen-Power_4c0a9a8d-6460-429f-a694-502869d026c5.jpg?v=1771441546","url":"https:\/\/hifikaupat.fi\/en\/products\/gz-hydrogen-power-2x12-inc","provider":"Hifikaupat.fi ","version":"1.0","type":"link"}