{"title":"Audison","description":"\u003cp\u003eAudison is an Italian premium car audio brand, known for its high-quality DSP amplifiers, subwoofers, and loudspeakers. Their products are suitable for demanding car audio systems and BMW\/Mini-specific installations.\u003c\/p\u003e","products":[{"product_id":"audison-apx5-5-25-2-tie-koaksiaalikaiuttimet","title":"Audison APX5 | 5.25″ 2-way coaxial speakers","description":"\u003cp\u003e\u003cstrong\u003eAudison APX5 is a low-profile 5.25″ 2-way coaxial speaker\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e Audison APX coaxials have been designed to be easy to install in the original locations of the car. The embedding depths of the elements are very reasonable and in all models (except APX 69) the tweeter is embedded in the middle of the midbass cone. With these speakers, there will never be a situation where the tweeter catches on the car's original speaker grille. In terms of sound quality, the midbass cone acts as a guide for the tweeter and the sound quality is good even in more difficult installation locations.\u003c\/p\u003e\n\n \u003cp\u003eThe acoustic deflector in front of the tweeter helps to get a flat response even when listening off-axis. This is a great thing when installing coaxials, as very few cars have speaker positions directed towards the listener. You can see a good example of this \u003ca href=\"https:\/\/www.fanaticaudio.com\/posts\/pioneer-ts-wx010a-asennus-testaus-ja-mittaus\/\"\u003ein our installation story\u003c\/a\u003e where APX coaxials are installed in the door at ankle height. Nevertheless, the high-end response is excellent when measured from the driver's seat (and also when listened to!).\u003c\/p\u003e\n\n\u003cp\u003e The speakers' characteristics have been fine-tuned using Klippel optimization. The sensitivity of the speakers in the APX series is very good, so you can easily play the speakers with just an instrument. But the power handling is also enough that you can get a lot more kick with an amplifier anyway.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e 5.25″ 2-way coaxial speaker\u003c\/li\u003e\n\n\u003cli\u003e power consumption 50 W RMS, 150 W Peak\u003c\/li\u003e\n\n\u003cli\u003e impedance 4 Ω\u003c\/li\u003e\n\n \u003cli\u003emidbass cone treated with water-repellent coating\u003c\/li\u003e\n\n\u003cli\u003e in the midbass, Triple-Wave upper suspension\u003c\/li\u003e\n\n\u003cli\u003e 32 mm voice coil in midbass\u003c\/li\u003e\n\n\u003cli\u003e sensitivity: 94 dB\/1W\/1m\u003c\/li\u003e\n\n\u003cli\u003e Frequency range: 70-23,000 Hz\u003c\/li\u003e\n\n\u003cli\u003e installation depth: 48 mm\u003c\/li\u003e\n\n\u003cli\u003e mounting hole diameter: 119 mm\u003c\/li\u003e\n\n\u003cli\u003e THERE ARE NO GRILLES INCLUDED WITH THE SPEAKERS\u003c\/li\u003e\n\n\u003cli\u003e price match\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":56758728458615,"sku":null,"price":99.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/5159\/4359\/files\/Audison-apx5-300x300_38f862c9-0927-4230-815f-066b2b37287e.jpg?v=1771440339"},{"product_id":"connection-sfa020-mini-anl-sulake-20a-1-kpl","title":"Connection SFA020 Mini ANL fuse 20A, 1 pc.","description":"\u003ch3 data-mce-fragment=\"1\"\u003eConnection SFA020 AFS \/ Mini ANL fuse 20A, 1 pc.\u003c\/h3\u003e\n\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003e 20A Mini ANL fuse\u003cbr data-mce-fragment=\"1\"\u003e not included in the package\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e Price\/piece\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e 64110006\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":56758744187255,"sku":"SFA020B\/KPL","price":2.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/5159\/4359\/files\/5d301c2d57bd4_50d7c98c-692a-49f4-b51d-385c784c000f.jpg?v=1771440637"},{"product_id":"audison-apbx10as2-10-koteloitu-aktiivisubwoofer","title":"Audison APBX 10 AS2 10\" Active Subwoofer Prima","description":"\u003ch3 data-mce-fragment=\"1\"\u003e Audison Prima APBX 10 AS2 10\" Active subwoofer\u003c\/h3\u003e\n\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\n \u003cbr data-mce-fragment=\"1\"\u003eThe updated version of the EISA 2018-2019 best active subwoofer. The 10\" long-throw dual-voice coil subwoofer has an impedance as low as 0.16 ohms, which is supplied by a specially developed internal amplifier with a whopping 400 W RMS power. A new feature in the AS2 version is the amplifier's DBT (Dynamic Bass Tracking) technology, which monitors the incoming signal and eliminates signal peaks that cause distortion, allowing the subwoofer to be played at full power and the sound always remains dynamic. \u003c\/div\u003e\n\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\n\u003cdiv data-mce-fragment=\"1\"\u003e The subwoofer has an SSP (Sub Smart Plug) terminal, which makes it easy to remove the amplifier from the container. A convenient wired level control is included in the package, which allows you to easily manage the overall subwoofer level directly from the driver's seat.\u003c\/div\u003e\n\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\n \u003cdiv data-mce-fragment=\"1\"\u003eThe ultra-compact subwoofer can be mounted to fire upwards for the most punchy and accurate reproduction, or downwards to exploit the car's acoustics to amplify the lowest frequencies. Velcro mounting feet are included for easy and quick removal. \u003c\/div\u003e\n\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\n\u003cdiv data-mce-fragment=\"1\"\u003e The APBX10AS2 automatically starts up from both speaker and line level signals. \u003c\/div\u003e\n\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\n\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\n\u003ch4 data-mce-fragment=\"1\"\u003e Features \u003c\/h4\u003e\n\n\u003cimg src=\"http:\/\/simex.refox.fi\/pictures\/10719603776ace7718.jpg\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/simex.refox.fi\/pictures\/10719603776ace7718.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\n\u003c\/div\u003e\n\n\u003cdiv data-mce-fragment=\"1\"\u003e 1. Integrated 400W Class D amplifier with high efficiency.\u003c\/div\u003e\n\n\u003cdiv data-mce-fragment=\"1\"\u003e 2. Input-level dynamic bass control technology utilizes all the power of the amplifier with minimal loss.\u003c\/div\u003e\n\n\u003cdiv data-mce-fragment=\"1\"\u003e 3. Butterworth low-pass filter with selectable crossover frequency (50 - 300 Hz) and 12 dB\/Oct. slope, as well as phase reversal and bass boost (0÷6 db @ 45Hz)\u003c\/div\u003e\n\n\u003cdiv data-mce-fragment=\"1\"\u003e 4. Crossover filter can be bypassed when the subwoofer is connected to the AP bit processor.\u003c\/div\u003e\n\n\u003cdiv data-mce-fragment=\"1\"\u003e 5. Speaker and line level inputs.\u003c\/div\u003e\n\n \u003cdiv data-mce-fragment=\"1\"\u003e6. Automatic wake-up selectable from either the remote control, speaker level input, or line level input.\u003c\/div\u003e\n\n\u003cdiv data-mce-fragment=\"1\"\u003e 7. The extremely low profile housing is designed to fully utilize the potential of the APS 10 DL driver.\u003c\/div\u003e\n\n\u003cdiv data-mce-fragment=\"1\"\u003e 8. SSP (Sub Smart Plug) connector terminal with plug \u0026amp; play connections allows for easy removal and reconnection of the subwoofer.\u003c\/div\u003e\n\n\u003cdiv data-mce-fragment=\"1\"\u003e 9. The 2S² (2 Sides \/ 2 Sounds) design allows the subwoofer to be installed either with the driver facing up or against the floor.\u003c\/div\u003e\n\n\u003cdiv data-mce-fragment=\"1\"\u003e 10. For a downward-mounted subwoofer, feet are supplied with velco stickers for easy attachment.\u003c\/div\u003e\n\n\u003cdiv data-mce-fragment=\"1\"\u003e 11. Rounded edges allow for easy installation in a container and eliminate standing waves that are generated inside the housing.\u003c\/div\u003e\n\n\u003cdiv data-mce-fragment=\"1\"\u003e 12. Exclusive cone, dust cup and basket geometry produce long travel while keeping overall depth low.\u003c\/div\u003e\n\n\u003cdiv data-mce-fragment=\"1\"\u003e 13. HRC AP remote control is included in the package.\u003c\/div\u003e\n\n \u003cdiv data-mce-fragment=\"1\"\u003e14. A sturdy metal protective grille keeps the element safe. \u003c\/div\u003e\n\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\n\u003ch4 data-mce-fragment=\"1\"\u003e Specifications\u003c\/h4\u003e\n\n\u003cdiv data-mce-fragment=\"1\"\u003e Type: Active enclosed subwoofer\u003c\/div\u003e\n\n\u003cdiv data-mce-fragment=\"1\"\u003e Woofer size: 250 mm (10\")\u003c\/div\u003e\n\n\u003cdiv data-mce-fragment=\"1\"\u003e Continuous amplifier power: 400 W\u003c\/div\u003e\n\n\u003cdiv data-mce-fragment=\"1\"\u003e Current amplifier power: 800 W\u003c\/div\u003e\n\n\u003cdiv data-mce-fragment=\"1\"\u003e Impedance: 0.16 Ohms\u003c\/div\u003e\n\n\u003cdiv data-mce-fragment=\"1\"\u003e Magnet: High-density flux ferrite\u003c\/div\u003e\n\n\u003cdiv data-mce-fragment=\"1\"\u003e Cone material: Water-repellent pressed paper\u003c\/div\u003e\n\n\u003cdiv data-mce-fragment=\"1\"\u003e Voice coil diameter: 60 mm \u003c\/div\u003e\n\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\n\u003ch4 data-mce-fragment=\"1\"\u003e Dimensions \u003c\/h4\u003e\n\n\u003cimg src=\"http:\/\/simex.refox.fi\/pictures\/10719603776acd1daf.jpg\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/simex.refox.fi\/pictures\/10719603776acd1daf.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\n\u003c\/div\u003e\n\n\u003cdiv data-mce-fragment=\"1\"\u003e Width: 440 mm (A)\u003c\/div\u003e\n\n\u003cdiv data-mce-fragment=\"1\"\u003e Height: 334 mm (B)\u003c\/div\u003e\n\n\u003cdiv data-mce-fragment=\"1\"\u003e Housing depth: 135 mm (C)\u003c\/div\u003e\n\n\u003cdiv data-mce-fragment=\"1\"\u003e Housing depth with element protrusion: 158 mm (C1)\u003c\/div\u003e\n\n\u003cdiv data-mce-fragment=\"1\"\u003e Weight: 9.4 kg\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e HRC AP remote control included in the package \u003c\/h4\u003e\n\n\u003cimg src=\"http:\/\/simex.refox.fi\/pictures\/1071960379078d6531.jpg\" data-mce-fragment=\"1\" data-mce-src=\"http:\/\/simex.refox.fi\/pictures\/1071960379078d6531.jpg\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e The remote control allows you to adjust the overall level of the subwoofer from the listening position.\u003c\/div\u003e\n\n\n\u003c\/div\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":56758996959607,"sku":"APBX10AS2","price":439.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/5159\/4359\/files\/86175e15a9fd18cb6_71c7677f-a221-48db-959a-a09364ae49fa.png?v=1771441550"},{"product_id":"audison-bit-ten-bit-one-kaukosaadin","title":"Audison DRC Remote Control bit Ten \/ bit One","description":"Remote control unit for Audison bit series devices. Replaces a broken or lost bit One\/TenD remote control and also functions as a controller for the bit Ten processor.\u003cbr\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":56759082975607,"sku":null,"price":99.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/5159\/4359\/files\/5d30196411538_4eff1e90-bac3-483a-8869-bce19936d21b.jpg?v=1771441751"},{"product_id":"audison-forza-af-c4-10-bit-4-kanavainen-dsp-vahvistin-1","title":"Audison Forza AF C4.10 Bit 4-Channel DSP Amplifier","description":"\u003ch1\u003e Audison Forza AF C4.10 bit 4-channel DSP amplifier\u003c\/h1\u003e\n\n\u003cp\u003e \u003ci\u003eAUDISON FORZA - The next level of OEM integration and optimization\u003c\/i\u003e\u003c\/p\u003e\n\n\u003cp\u003e More power\u003cbr\u003e More information\u003cbr\u003e More control\u003cbr\u003e Increase revenue\u003cbr\u003e Increase speed\u003cbr\u003e More tools\u003cbr\u003e More features\u003cbr\u003e More instructions\u003cbr\u003e More flexibility\u003cbr\u003e All on one, state-of-the-art platform!\u003c\/p\u003e\n\n\u003ch3\u003e \u003cb\u003eThe top-notch sound quality you can expect from Audison\u003c\/b\u003e\n\u003c\/h3\u003e\n\n \u003cp\u003e\u003cb\u003eThe AF C4.10\u003c\/b\u003e bit features four high-quality amplified channels 90W x 4 @4Ω*, 150W x 4 @2Ω*, with the ultimate sound quality of the latest generation of Audison D-Class technology. Higher switching frequencies, steeper filtering and higher tolerance components produce sound that exceeds Class D expectations in an amazingly compact package! This, combined with a DSP operating at \u003cb\u003e24 bit\/96\u003c\/b\u003e kHz, extends the scale to 40 kHz and has earned the coveted \u003cb\u003eHi\u003c\/b\u003e gh- \u003cb\u003eRes\u003c\/b\u003e olution certification. Combining channel pairs delivers 300 W x 2 @4Ω, ensuring flexible and powerful performance. Support for Audison B-CON's Absolute Volume function ensures maximum bit depth even with wireless connections!\u003c\/p\u003e\n\n\u003cp\u003e *Output continuous power (RMS) @14.4 VDC, 1% THD, all channels driven.\u003c\/p\u003e\n\n\u003ch3\u003e \u003cb\u003eNext-generation control options and sound management\u003c\/b\u003e\n\u003c\/h3\u003e\n\n \u003cp\u003eAudison's all-new bit-PC software can analyze, route and correct your signal in completely new ways - now you can measure, modify and finally tune your sound with one powerful tool! The new graphical user interface simplifies every control and function, integrates acoustic measurement and ensures efficient tuning and excellent sound! Acoustic RTA is integrated with an equalizer graph and is compatible with your USB microphone or sound card. The Final EQ function allows for final equalization without damaging the delicate left\/right channel frequency relationships. Six processed preamp outputs in addition to four amplified channels, so the Forza DSP section can easily manage a larger system.\u003c\/p\u003e\n\n\u003ch3\u003e \u003cb\u003eAdvanced OEM integration capabilities\u003c\/b\u003e\n\u003c\/h3\u003e\n\n \u003cp\u003eForza's eight analog inputs plus an optical Toslink digital input support full connectivity with even the most complex OEM systems. If more analog inputs are required, the optional F4IN expansion card adds four additional analog input channels! If coaxial SPDIF or a second Toslink SPDIF input is required, the optional \u003ca href=\"https:\/\/www.autostudio.fi\/fi\/product\/audison-f2o-optisen-sisaantulon-laajennuskortti\/F2O\" target=\"_blank\"\u003eF2O\u003c\/a\u003e expansion card can be used. Audison's classic de-EQ process is combined with de-Time and de-Phase features, allowing the original sound to be restored in almost all OEM systems. Electronic signal analysis ensures proper integration and correction for each input and output channel. Built-in Universal Speaker Simulation (USS) technology provides maximum compatibility with any OEM source without muting or instability.\u003c\/p\u003e\n\n \u003cp\u003e\u003cb\u003eThe AF C4.10 bit includes six high-quality wire harnesses with separate strain relief in front of each Molex connector:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003e 1. 8 RCA Pre-In connectors for connecting aftermarket sources\u003cbr\u003e 2. 8 speaker-level connections for connecting the original source\u003cbr\u003e 3. Speaker-Out with 4 labeled cables for connecting the amplifier to the speakers\u003cbr\u003e 4. DSP-Out with 6 labeled cables for connecting one or more additional amplifiers\u003cbr\u003e 5. Forza Control cable with 2 wires for remote start and remote exit signals and 2 wires for functions programmable with bitDrive software.\u003c\/p\u003e\n\n\u003ch3\u003e \u003cb\u003eSpecifications\u003c\/b\u003e\n\u003c\/h3\u003e\n\n\u003cp\u003e \u003cb\u003ePower supply:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003e Rated power supply \/ fuse: 11 ÷ 15 VDC \/ 1 x 30A\u003cbr\u003e Operating voltage range: 6.5 ÷ 17.5 VDC\u003cbr\u003e No-load current: 1.04 A\u003cbr\u003e Standby current: 0.9 mA\u003cbr\u003e Current consumption @ 14.4 VDC, minimum switching impedance (Max Musical Power): 29 A\u003cbr\u003e Excitation IN: 4 ÷15 VDC (1 mA)\u003cbr\u003e Excitation OUT: 6.5 ÷15 VDC (150 mA) \u003cbr\u003eART – Automatic Remote Turn on\/off from Speaker-In: 1.5 VDC\u003cbr\u003e Efficiency (RMS) @14.4 VDC, 1% THD, 4Ω, all channels: 81%\u003c\/p\u003e\n\n\u003cp\u003e \u003cb\u003eAmplifier:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003e Distortion – THD+N @ 1 KHz, 4Ω, 70% rated power: 0.03%\u003cbr\u003e Bandwidth @ -3 dB: 10 Hz ÷ 42 kHz\u003cbr\u003e S\/N Ratio (A weighted @ 1 V input, rated power) Main input: 98 dBA\u003cbr\u003e S\/N Ratio (A weighted @ rated power) Optical input: 105 dBA\u003cbr\u003e Minimum load: 2 Ohm\u003cbr\u003e Continuous Power (RMS) @14.4 VDC, 1% THD:\u003cbr\u003e 4 Ch @ 4Ω: 90W x 4\u003cbr\u003e 4 Ch @ 2Ω: 150W x 4\u003c\/p\u003e\n\n\u003cp\u003e 2 Ch (Bridged 1\/2; 3\/4) @ 4Ω: 300 W x 2\u003c\/p\u003e\n\n\u003cp\u003e \u003cb\u003eCEA Specs:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003e Output power @ 4Ω, 1% THD+N, 14.4 V: 90 W x 4\u003cbr\u003e SN ratio (ref. 1 W output): 80 dB\u003c\/p\u003e\n\n\u003cp\u003e \u003cb\u003eConnections:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003e Pre-In RCA (8 Ch): 0.6 ÷ 6 VRMS (15 kΩ Imp.)\u003cbr\u003e Speaker-In speaker level (8 Ch + additional 4 Ch with F4IN additional driver): 2.2 ÷ 22 VRMS (5 Ω Imp.)\u003cbr\u003e Digital input: 1 x Optical S\/PDIF; Max 192 kHz \/ 24 bit + 1 x Optical\/Coaxial S\/PDIF with F2O additional driver\u003cbr\u003e DSP Preout RCA (6 Ch): 5V RMS\u003c\/p\u003e\n\n\u003cp\u003e \u003cb\u003eDSP:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003e Audio DSP and converters: \u003cbr\u003eAnalog Devices ADAU1467 audio processor.\u003cbr\u003e Processing @ 96 kHz. Analog Devices 3 x ADAU1978 (4ch) and ADAU1966A (16ch) A\/D and D\/A converters (24 bit\/192 kHz) provide very high performance\u003c\/p\u003e\n\n\u003cp\u003e Filter type:\u003cbr\u003e Full \/ Highpass \/ Lowpass \/ Bandpass\u003c\/p\u003e\n\n\u003cp\u003e Filter type and slope:\u003cbr\u003e Linkwitz-Riley @ 24\/12\/36\/48 dB\/oct.\u003cbr\u003e Butterworth @ 6\/12\/18\/24\/30\/36\/42\/48 dB\/oct.\u003cbr\u003e Bessel @ 6\/12\/18\/24\/30\/36\/42\/48 dB\/oct.\u003cbr\u003e Chebyshev @ 6\/12\/18\/24\/30\/36\/42\/48 dB\/oct.\u003cbr\u003e QLP @ 6 dB\/oct.\u003c\/p\u003e\n\n\u003cp\u003e Crossover frequency:\u003cbr\u003e 20Hz ÷ 20kHz\u003c\/p\u003e\n\n\u003cp\u003e Phase control:\u003cbr\u003e 0° \/ 180°, All-Pass filters\u003c\/p\u003e\n\n\u003cp\u003e Analog input equalizer (20 Hz ÷ 20 kHz):\u003cbr\u003e 12 Biquad + delay\u003c\/p\u003e\n\n\u003cp\u003e Output equalizer:\u003cbr\u003e Parametric\/Graphic biquad: 15 bands, 20 Hz ÷ 20 kHz\u003c\/p\u003e\n\n\u003cp\u003e Input and output real-time audio monitor:\u003cbr\u003e RTA\u003c\/p\u003e\n\n\u003cp\u003e Time delay adjustment (distance):\u003cbr\u003e 0 ÷ 510 cm \/ 0 ÷ 200.8 inches\u003c\/p\u003e\n\n\u003cp\u003e Time delay adjustment (time):\u003cbr\u003e 0 ÷ 15 ms\u003c\/p\u003e\n\n\u003cp\u003e \u003cb\u003eControl connections:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003e Audison DRCC port: Input for DRCC remote control (optional) \u003cbr\u003eAudison ADC port: Control other Audison devices that support this standard\u003cbr\u003e Control 1: Customizable functions (+12V activated)\u003cbr\u003e Control 2: Customizable functions (+12V activated)\u003c\/p\u003e\n\n\u003cp\u003e \u003cb\u003eGeneral requirements:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003e PC connections: Micro USB 1.1 \/ 2.0 \/ 3.0 compatible\u003cbr\u003e Software\/PC requirements: Windows 10, Windows 11 (minimum resolution 1024 x 768\u003cbr\u003e Ambient operating temperature range: 0°C to 55°C (32°F to 131°F)\u003c\/p\u003e\n\n\u003cp\u003e \u003cb\u003eSize:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003e Max dimensions W x H x D (mm\/inch): 200 x 47 x 134 \/ 7.87 x 1.85 x 5.27\u003cbr\u003e Weight (kg): 1.38\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":56759789388151,"sku":"AFC4.10BIT","price":450.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/5159\/4359\/files\/14479642298ffda2f3_64b91643-0de7-45e1-aef8-344668c36d19.jpg?v=1771440368"},{"product_id":"audison-prima-apk165-6-5-2-tie-erillissarja","title":"Audison APK165 Prima 6.5\" Component Speaker System","description":"\u003ch1\u003eAudison APK165 Audison Prima 6.5\" 2-way separate set\u003c\/h1\u003e\n\n\u003cdiv\u003e The APK 165 separate set consists of AP 6.5 midbasses and AP 1 tweeters equipped with passive crossovers. The set is ideal for installation in standard car locations and has a neutral, accurate sound.\u003c\/div\u003e\n\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\n\u003cdiv\u003e As an excellent additional option, we recommend Audison's DSP amplifier, which allows you to further modify the tone to your liking and with additional power, you can utilize the true potential of the speaker set.\u003cbr\u003e\u003cbr\u003e\n\u003ch4\u003e General information about the series\u003c\/h4\u003e\n\n\u003cdiv\u003e Type: 2-way separate set\u003c\/div\u003e\n\n\u003cdiv\u003e Midbass element size: 165 mm\u003c\/div\u003e\n\n\u003cdiv\u003e Tweeter size: 26 mm\u003c\/div\u003e\n\n\u003cdiv\u003e Frequency response: 60 Hz - 20 kHz\u003c\/div\u003e\n\n\u003cdiv\u003e Continuous power rating: 100 W\u003c\/div\u003e\n\n\u003cdiv\u003e Instantaneous power consumption: 300 W\u003c\/div\u003e\n\n\u003cdiv\u003e Impedance: 4 Ohms\u003c\/div\u003e\n\n\u003cdiv\u003e Sensitivity: 93.5 dB\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\n\u003ch3\u003e AP 6.5 mid-bass driver\u003c\/h3\u003e\n\n \u003cdiv\u003eThe AP 6.5 is a mid-bass with an exceptionally wide frequency response and a sturdy voice coil, so it can withstand even loud playing. The tone is neutrally accurate, and thanks to the cone's lightweight but rigid structure, even the smallest dynamics and subtle tonal details are transmitted to the listener's ears exactly as the artist intended.\u003c\/div\u003e\n\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\n\u003ch3\u003e Mid-woofer driver features \u003c\/h3\u003e\n\n\u003cdiv\u003e\n\n\u003cimg src=\"http:\/\/simex.refox.fi\/pictures\/10719602bafa48f354.jpg\"\u003e\u003cbr\u003e\n\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\n\u003cdiv\u003e 1. Very wide frequency response, both high and low frequencies.\u003c\/div\u003e\n\n\u003cdiv\u003e 2. Designed to operate without a passive crossover filter for maximum efficiency.\u003c\/div\u003e\n\n\u003cdiv\u003e In the design and optimization of the cone, a Klippel R\u0026amp;D Scan vibrometer has been utilized to calibrate the mechanical low-pass filter.\u003c\/div\u003e\n\n\u003cdiv\u003e 3. Water-repellent treated paper cone whose profile has been modeled using FEM (Finite Element Method) simulation and further optimized using the Klippel R\u0026amp;D Scan vibrometer.\u003c\/div\u003e\n\n\u003cdiv\u003e 4. Shallow installation depth makes it easier to fit the speakers in their original locations.\u003c\/div\u003e\n\n \u003cdiv\u003e5. The upper suspension made of thermoplastic polyurethane with a three-part structure keeps the movement of the element very linear.\u003c\/div\u003e\n\n\u003cdiv\u003e 6. The compact body structure is treated with a scratch-resistant coating.\u003c\/div\u003e\n\n\u003cdiv\u003e 7. 32mm pure copper voice coil produces a balanced tone in the critical midrange.\u003c\/div\u003e\n\n\u003cdiv\u003e 8. Developed using the KLIPPEL software package\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\n\u003ch3\u003e Mid-woofer specifications\u003c\/h3\u003e\n\n\u003cdiv\u003e Type: Midbass\u003c\/div\u003e\n\n\u003cdiv\u003e Size: 165mm (6.5\")\u003c\/div\u003e\n\n\u003cdiv\u003e Continuous power rating: 70 W\u003c\/div\u003e\n\n\u003cdiv\u003e Instantaneous power consumption: 210 W\u003c\/div\u003e\n\n\u003cdiv\u003e Impedance: 4 Ohms\u003c\/div\u003e\n\n\u003cdiv\u003e Frequency response: 60 Hz - 5 kHz\u003c\/div\u003e\n\n\u003cdiv\u003e Sensitivity: 93.5 dB\u003c\/div\u003e\n\n\u003cdiv\u003e Magnet: High-density flux ferrite\u003c\/div\u003e\n\n\u003cdiv\u003e Cone material: Water-repellent pressed paper\u003c\/div\u003e\n\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\n\u003ch3\u003e Mid-woofer electroacoustic parameters\u003c\/h3\u003e\n\n\u003cdiv\u003e\n\n\u003cdiv\u003e D: 129 mm\u003c\/div\u003e\n\n\u003cdiv\u003e Xmax: ±2.2 mm\u003c\/div\u003e\n\n\u003cdiv\u003e Re: 3.1\u003c\/div\u003e\n\n\u003cdiv\u003e Fs: 80 Hz\u003c\/div\u003e\n\n\u003cdiv\u003e Le: 0.23 mH\u003c\/div\u003e\n\n\u003cdiv\u003e Left: 7.6 l\u003c\/div\u003e\n\n\u003cdiv\u003e MMS: 12 g\u003c\/div\u003e\n\n\u003cdiv\u003e Cms: 0.31 mm\/N\u003c\/div\u003e\n\n\u003cdiv\u003e BL: 4.7 T•m\u003c\/div\u003e\n\n\u003cdiv\u003e Qts: 0.7\u003c\/div\u003e\n\n\u003cdiv\u003e Qes: 0.8\u003c\/div\u003e\n\n\u003cdiv\u003e Qms: 4.7\u003c\/div\u003e\n\n\u003cdiv\u003e SPL: 93.5 dB\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\n\u003ch3\u003e Midwoofer dimensions \u003c\/h3\u003e\n\n\u003cdiv\u003e\n\n\u003cimg src=\"https:\/\/simex.refox.fi\/pictures\/1071960128c5573daa.jpg\"\u003e\u003cbr\u003e\n\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\n\u003cdiv\u003e Outer diameter: 165 mm (A)\u003c\/div\u003e\n\n\u003cdiv\u003e Mounting hole diameter: 141 mm (B)\u003c\/div\u003e\n\n\u003cdiv\u003e Total depth: 60 mm (C)\u003c\/div\u003e\n\n\u003cdiv\u003e Mounting hole depth: 56 mm (D)\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\n\u003ch3\u003e AP 1 tweeter\u003c\/h3\u003e\n\n \u003cdiv\u003eThe AP 1 tweeter consists of a 26 mm dome and a specially designed acoustic lens that compensates for the 10 kHz - 13 kHz frequency range. A neodymium REN-type magnet and an extremely small passive crossover keep the tweeter reproduction toned and controlled.\u003c\/div\u003e\n\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\n\u003ch3\u003e Tweeter driver characteristics \u003c\/h3\u003e\n\n\u003cdiv\u003e\n\n\u003cimg src=\"https:\/\/simex.refox.fi\/pictures\/9051600eaa2df04ef.jpg\"\u003e\u003cbr\u003e\n\n\u003c\/div\u003e\n\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\n\u003cdiv\u003e 1. The 26 mm dome combined with the oversized top suspension ensures excellent efficiency and minimal resonances.\u003c\/div\u003e\n\n\u003cdiv\u003e 2. Neodymium magnet with low carbon plates allows for compact size and more linear playback even in the most demanding music samples.\u003cbr\u003e\n\n\u003c\/div\u003e\n\n\u003cdiv\u003e 3. The acoustic lens is designed to compensate for attenuation and emphasis caused by OEM grilles in the 10 - 13 kHz range.\u003cbr\u003e\n\n\u003c\/div\u003e\n\n\u003cdiv\u003e 4. The extremely compact passive crossover APCX TW is included in the package and the treble level control (0 dB, +2 dB) allows the sound to be adjusted to work in the original installation locations.\u003cbr\u003e\n\n\u003c\/div\u003e\n\n \u003cdiv\u003e5. The crossovers are equipped with OEM-compatible quick connectors and are clearly color-coded to minimize connection errors during installation.\u003cbr\u003e\n\n\u003c\/div\u003e\n\n\u003cdiv\u003e 6. The package comes with a wide range of different tweeter mounting brackets that can be used to fit the original locations of almost any car.\u003cbr\u003e\n\n\u003c\/div\u003e\n\n\u003cdiv\u003e 7. The ultra-light ferrofluid-cooled tweeter voice coil is wrapped in Kapton former for better heat distribution.\u003cbr\u003e\n\n\u003c\/div\u003e\n\n\u003cdiv\u003e 8. The shape of the dome and the motor are optimized using FEM (Finite Element Method) simulation.\u003cbr\u003e\n\n\u003c\/div\u003e\n\n\u003cdiv\u003e 9. Developed using the KLIPPEL software package\u003cbr\u003e\n\n\u003c\/div\u003e\n\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\n\u003ch3\u003e Tweeter driver specifications\u003c\/h3\u003e\n\n\u003cdiv\u003e Type: Tweeter\u003c\/div\u003e\n\n\u003cdiv\u003e Size: 26mm (1\")\u003c\/div\u003e\n\n\u003cdiv\u003e Power handling: Hi-pass filtered 3.5 kHz @ 12 dB\/Oct. 150 W instantaneous power\u003c\/div\u003e\n\n\u003cdiv\u003e Impedance: 4 Ohms\u003c\/div\u003e\n\n\u003cdiv\u003e Frequency response: 2 kHz - 20 kHz\u003c\/div\u003e\n\n\u003cdiv\u003e Sensitivity: 93 dB\u003c\/div\u003e\n\n\u003cdiv\u003e Magnet: Neodymium\u003c\/div\u003e\n\n\u003cdiv\u003e Cap material: Tetolo fiber\u003c\/div\u003e\n\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\n\u003ch3\u003e Tweeter element electroacoustic parameters\u003c\/h3\u003e\n\n\u003cdiv\u003e Diameter: 27.5 mm\u003c\/div\u003e\n\n\u003cdiv\u003e Xmax: -\u003c\/div\u003e\n\n\u003cdiv\u003e Re: 3.5\u003c\/div\u003e\n\n\u003cdiv\u003e Fs: 1500 Hz\u003c\/div\u003e\n\n\u003cdiv\u003e Le: 0.02 mH\u003c\/div\u003e\n\n\u003cdiv\u003e Left: -\u003c\/div\u003e\n\n\u003cdiv\u003e Weight: 0.16 g\u003c\/div\u003e\n\n\u003cdiv\u003e Cms: 0.09 mm\/N\u003c\/div\u003e\n\n\u003cdiv\u003e BL: 1.3 m\u003c\/div\u003e\n\n\u003cdiv\u003e Qts: 0.98\u003c\/div\u003e\n\n \u003cdiv\u003eQes: 2.78\u003c\/div\u003e\n\n\u003cdiv\u003e Qms: 1.5\u003c\/div\u003e\n\n\u003cdiv\u003e SPL: 93 dB\u003c\/div\u003e\n\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\n\u003ch3\u003e Dimensions of the tweeter and crossover \u003c\/h3\u003e\n\n\u003cdiv\u003e\n\n\u003cimg src=\"https:\/\/simex.refox.fi\/pictures\/9051600eaa2e0090d.jpg\"\u003e\u003cbr\u003e\n\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\n \u003cb\u003eTreble\u003c\/b\u003e\u003cbr\u003e\n\n\u003c\/div\u003e\n\n\u003cdiv\u003e Outer diameter: 44 mm (A)\u003c\/div\u003e\n\n\u003cdiv\u003e Mounting hole diameter: 38.5 mm (B)\u003c\/div\u003e\n\n\u003cdiv\u003e Total depth: 20 mm (C)\u003c\/div\u003e\n\n\u003cdiv\u003e Mounting hole depth: 8.5 mm (D)\u003c\/div\u003e\n\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\n\u003cdiv\u003e \u003cb\u003eCrossover filter\u003c\/b\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e Height: 46.5 mm (G)\u003c\/div\u003e\n\n\u003cdiv\u003e Width: 37.5 mm (H)\u003c\/div\u003e\n\n\u003cdiv\u003e Depth: 20.1 mm (I)\u003c\/div\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":56759797776759,"sku":null,"price":169.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/5159\/4359\/files\/5d301687b23b6.jpg?v=1771440479"},{"product_id":"audison-apbmw-s8-2-bmw-subwoofer-2-ohm","title":"Audison APBMW S8-2.2 8\" Subwoofer BMW \/ Mini 2 Ohm","description":"\u003cp\u003eThe Audison APBMW S8-2.2 is an 8″ subwoofer designed for BMW cars to fit in the original location under the front seats. Plug\u0026amp;Play connections and a frame that fits directly into the original speaker's position make installation easy without additional mounting accessories.\u003c\/p\u003e\n\u003cp\u003eThis 2-ohm version is especially suitable when you want to get more power from your BMW head unit or the amplifier of your 676 Hi-Fi package, or when adding a separate amplifier. If your car has a Top Hi-Fi system (S688A\/S677A\/S752A), choose the 4-ohm model APBMW S8-4.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for BMW and Mini cars in original locations\u003c\/li\u003e\n\u003cli\u003eNeodymium magnets inversely mounted — shallow mounting depth, high performance\u003c\/li\u003e\n\u003cli\u003e38 mm aluminum voice coil former — linear and distortion-free reproduction up to extreme limits\u003c\/li\u003e\n\u003cli\u003eTwo 5 mm polyurethane gaskets separate the element from the car structure\u003c\/li\u003e\n\u003cli\u003eAcoustically transparent protective fabric covering the voice coil\u003c\/li\u003e\n\u003cli\u003ePlug\u0026amp;Play — fits the same mounts and connectors as the original BMW\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 200 mm (8″)\u003c\/li\u003e\n\u003cli\u003eImpedance: 2 Ω\u003c\/li\u003e\n\u003cli\u003eContinuous power handling: 150 W RMS\u003c\/li\u003e\n\u003cli\u003ePeak power handling: 300 W\u003c\/li\u003e\n\u003cli\u003eFrequency response: 40–500 Hz\u003c\/li\u003e\n\u003cli\u003eSensitivity: 91 dB\u003c\/li\u003e\n\u003cli\u003eVoice coil diameter: 50 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 1.21 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eElectroacoustic Parameters\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eD: 159 mm | Xmax: ±7 mm\u003c\/li\u003e\n\u003cli\u003eRe: 2.2 Ω | Fs: 45 Hz | Le: 0.32 mH\u003c\/li\u003e\n\u003cli\u003eVas: 16.3 L | Mms: 41 g | Cms: 0.3 mm\/N\u003c\/li\u003e\n\u003cli\u003eBL: 5.6 T·m | Qts: 0.61 | Qes: 0.83 | Qms: 2.3\u003c\/li\u003e\n\u003cli\u003eSPL: 91 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDimensions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOverall diameter of the element: 217 mm\u003c\/li\u003e\n\u003cli\u003eOverall diameter with connector: 239 mm\u003c\/li\u003e\n\u003cli\u003eMounting cut-out diameter: 191 mm\u003c\/li\u003e\n\u003cli\u003eOverall depth: 55.2 mm\u003c\/li\u003e\n\u003cli\u003eMounting depth: 32 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eAll BMW models with subwoofer locations under the front seats. Also the following G-series X-models (revised mounting depth):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eX3 G01, X3 G08\u003c\/li\u003e\n\u003cli\u003eX4 G02\u003c\/li\u003e\n\u003cli\u003eX5 G05\u003c\/li\u003e\n\u003cli\u003eX6 G06\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMini:\u003c\/strong\u003e F56 (2014–), F55 (2014–), F57 (2015–), F54 (2015–), R60 (2010–2016), F60 (2017–), R61 (2012–2016)\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNote! This speaker is not suitable for Top Hi-Fi systems (S688A\/S677A\/S752A). For these, choose the Audison APBMW S8-4.\u003c\/em\u003e\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":56781729399159,"sku":null,"price":169.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/5159\/4359\/files\/14135633bd8d92ee4c.jpg?v=1771762368"},{"product_id":"hts-2023-tarjousera-audison-apbmw-k4e-bmw-erillissarja","title":"Audison APBMW K4E 4\" Component Speakers for BMW \/ Mini","description":"\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eAudison APBMW K4E BMW 2-way component speaker set\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cbr data-mce-fragment=\"1\"\u003eThis component speaker set, designed for BMW and Mini cars, improves the car's soundscape and is incredibly easy to install. The Audison APBMW K4E creates an immersive sound experience in your car, adding precision and color to your music. The set includes a 4\" mid-bass speaker with a paper cone that produces natural sound, and a 1.1\" Tetolon dome tweeter that supports the 4\" mid-bass's mid and high frequencies and expands the sound field into the third dimension.\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eIncrease performance by adding an amplifier\u003c\/h4\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cimg src=\"http:\/\/simex.refox.fi\/pictures\/972600abac4c5882.jpg\" data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eWhile the APBMW K4E is suitable for use with a car stereo amplifier due to its high sensitivity, its true potential is realized only when an Audison Bit series DSP amplifier, such as the AP4.9 bit, is used to drive the speakers. An amplifier naturally increases the power delivered to the speakers, but at least as important is the integrated DSP (digital signal processor), which allows the speakers' tonal balance to be adjusted to suit each listener's preferences.\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eFeatures\u003c\/h4\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cimg src=\"http:\/\/simex.refox.fi\/pictures\/972600abac4c884b.jpg\" data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e1. Specifically developed for BMW-Mini cars with a factory component speaker system.\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e2. Neodymium magnets maximize performance while keeping size small and weight low.\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e3. The 25 mm fiberglass voice coil of the bass driver withstands high power and is very rigid.\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e4. The water-repellent pressed paper bass driver produces natural midrange tones without additional resonances.\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e5. The BMW-Mini compatible cast aluminum basket with plug \u0026 play connectors allows for easy installation.\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e6. 25 mm Tetolon voice coil tweeter with a radiation pattern optimized using FEM simulation.\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e7. Tweeter mounting plate included in the package for easy OEM installation.\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e8. 30 cm speaker extension cable with plug \u0026 play connectors makes installation easy and effortless.\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e9. Motor protection cover to dampen rear reflections.\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e10. Compact crossover made of high-quality components with plug\u0026play connectors.\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cbr data-mce-fragment=\"1\"\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eIncluded accessories\u003c\/h4\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cimg src=\"http:\/\/simex.refox.fi\/pictures\/972600abbaee374c.jpg\" data-mce-fragment=\"1\"\u003e \u003cb data-mce-fragment=\"1\"\u003e30 cm speaker extension cables\u003c\/b\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg src=\"http:\/\/simex.refox.fi\/pictures\/972600abbaf60bf4.jpg\" data-mce-fragment=\"1\"\u003e \u003cb data-mce-fragment=\"1\"\u003eCompact crossover for tweeter cable\u003c\/b\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cimg src=\"http:\/\/simex.refox.fi\/pictures\/972600abbaeec039.jpg\" data-mce-fragment=\"1\"\u003e \u003cb data-mce-fragment=\"1\"\u003eTweeter mounting frame facilitates installation\u003c\/b\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eTechnical specifications\u003c\/h4\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e4\" paper cone mid-bass\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e1.1\" Tetolon tweeter\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003eFrequency response: 90 Hz - 23 kHz\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003eSensitivity: 89 dB\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003eContinuous power handling: 50 W\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003ePeak power handling: 100 W\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003eImpedance: 4 Ω\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003eCrossover high-pass filter: 6 kHz @ 6 dB\/Oct.\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eElectro-acoustic parameters\u003c\/h4\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cb data-mce-fragment=\"1\"\u003eMid-bass\u003c\/b\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003eD: 80 mm\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003eXmax: 0.5 mm\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003eRe: 3.3 Ω\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003eFs: 90 Hz\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003eLe: 0.32 mH\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003eVas: 1.8 L\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003eMms: 6.3 g\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003eCms: 0.5 mm\/N\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003eBL: 4.8 Tm\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003eQts: 0.48\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003eQes: 0.51\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003eQms: 8.2\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003eSpl: 88 dB\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eTweeter\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003eD: 29 mm\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003eRe: 3.7 Ω\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003eFs: 1.6 kHz\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003eSpl: 90 dB\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eMid-bass dimensions\u003c\/h4\u003e\n\u003cimg src=\"http:\/\/simex.refox.fi\/pictures\/972600abac53e0d8.jpg\" data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003eOuter diameter: 119 mm (A)\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003eOuter diameter with tabs: 143 mm (A3)\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003eMounting cut-out diameter: 100 mm (B)\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003eMounting depth from tweeter to motor: 67.5 mm (C)\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003eMounting depth from surface to motor: 39 mm (D)\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003eOverall diameter measured from mounting holes: 129.5 mm (U)\u003c\/div\u003e\n\u003cbr data-mce-fragment=\"1\"\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eCompatibility\u003c\/h4\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003eIt is recommended to consult the Audison Sound Pack Configurator to determine different options for improving the sound in your BMW or Mini.\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003eNote! The component set installed in the front doors requires an OEM tweeter location in the door mirror triangle or A-pillar. If the tweeter cup is missing, it must be purchased from a BMW dealership.\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eBMW\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e1-series (E81, 2007-2012) front doors\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e1-series (E82, 2007-2013) front doors\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e1-series (E87, 2004-2011) front doors\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e1-series (E88, 2007-2013) front doors and rear speakers\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e1-series (F20, 2011-) front doors\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e1-series (F21, 2012-) front doors\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e1-series (F52, 2015-) front doors\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e2-series (F22, F23, 2014-) front doors\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e2-series (F45, F46, F87, 2015-) front doors\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e3-series (E90, 2005-2011) front doors\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e3-series (E91, 2005-2012) front and rear doors\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e3-series (E92, 2006-2013) front doors and rear speakers\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e3-series (E93, 2007-2013) front doors and rear speakers\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e3-series (F30, F31, 2012-) front and rear doors\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e3-series (F34, 2013-) front and rear doors\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e3-series (F35, 2014-) front and rear doors\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e3-series (F80, 2014-) front doors and rear speakers\u003cbr data-mce-fragment=\"1\"\u003e4-series (F32, F33, 2013-) front doors and rear speakers\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e4-series (F36, 2014-) front and rear doors\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e4-series (F82, F83, 2014-) front doors and rear speakers\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e5-series (F10, F11, F18, 2010-2016) front and rear doors\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e5-series (G30, G31, 2017-) front and rear doors\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e6-series (F06, F14, 2011-) front and rear doors\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e6-series (F12, F13, 2011-) front doors and rear speakers\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e7-series (G11, G12, 2016-) front and rear doors\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003eX1 (E84, 2010-2015) front doors\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003eX1 (F48, F49, 2016-) front and rear doors\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003eX3 (F25, 2011-2017) front and rear doors\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003eX4 (F26, 2014-) front and rear doors, D-pillars\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003eX5 (F15, F85, 2014-) front and rear doors (Requires Audison APBMW A4E speaker adapters.)\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003eX6 (F16, F86, 2014-) front and rear doors (Requires Audison APBMW A4E speaker adapters.)\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eMini\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e3-door hatchback (F56, 2014-) front doors and rear speakers\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e5-door hatchback (F55, 2014-) front and rear doors\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003eCabrio (F57, 2015-) front doors and rear speakers\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003eClubman (F54, 2015-) front and rear doors\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003eCountryman (F60, 2017-) front and rear doors\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":56781729464695,"sku":"apbmw k4e","price":209.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/5159\/4359\/files\/5d30167e65d62.jpg?v=1771762369"}],"url":"https:\/\/hifikaupat.fi\/en\/collections\/audioson.oembed","provider":"Hifikaupat.fi ","version":"1.0","type":"link"}